NonStop Firmware Matrices

ChangesDateVersion
• Added “Minimum Supported OA Firmware Levels for NonStop BladeSystems”
(page 56) to list the minimum supported OA firmware level for each type of
NonStop BladeSystem.
• Added information about T8004 SPR revision BAE to “Valid System Firmware
and HSS Combinations” (page 50).
• Added an entry for NS2300 and NS2400, NS2400T, or NS2400ST (rx2800
i4) to “Valid System Firmware and HSS Combinations” (page 50).
• Added information about NS2300 and NS2400, NS2400T, or NS2400ST
(rx2800 i4) to “Identification of BL860c i4, BL860c i2, rx2800 i2, and
rx2800 i4 Server Firmware Versions” (page 54).
• Added an entry for NonStop NS2300 and NonStop NS2400, NS2400T,
and NS2400ST to “Supplementary Steps for Updating Firmware Components
Not Delivered on the SUT” (page 57).
• Updated the approximate file size of the system firmware bundle download
file in “Supplementary Steps for Updating Firmware Components Not
Delivered on the SUT” (page 57).
• Added “Updating rx2800 i4 Server Firmware” (page 61).
• Added “Updating Interconnect 6125G Ethernet Blade Switch (C7000)
Firmware” (page 66).
• Corrected a reference to NB56000c to include NB56000c-cg.
• Updated some links to new HPSC locations.
Made these changes:15 August 2013546227–024
• Updated the following in “NonStop Supported Levels for J06.04–J06.17 and
H06.15–H06.28 for Firmware Not Delivered on the SUT ” (page 12):
◦ Added entry for the BL860c i4 (NB56000c/c-cg).
◦ Added entry for the Interconnect 6125G Ethernet Switch (C7000).
◦ Changed the supported firmware version for the UPS management module
(HP R5000) to 1.01.010 as the only supported version. Added a caution
statement explaining the incompatibility between other firmware versions
and the new network module hardware revision.
◦ Added Onboard Administrator (OA) recommended firmware version 3.60.
◦ Added BL860 i2 (NB54000c) recommended firmware version 26.36.
◦ Added rx2800 i2 (NS2100) recommended firmware version 26.36.
◦ Added rx2800 i2 (NS2200) recommended firmware version 26.36.
• Added the new section “SUT Delivered NonStop Firmware Levels for J06.16
and H06.27” (page 21). Edited this section to describe differences from the
previous RVU:
◦ Updated c7000 enclosure ServerNet firmware level to AAG.
◦ Updated CLIM BIOS and CLIM iLO firmware levels to AAH.
◦ Updated CLIM HCA and CLIM NIC firmware levels to AAG.
New and Changed Information in This Edition 7