NonStop Firmware Matrices

Older New and Changed Information Entries
Older New and Changed Information Entries
ChangesDateVersion
Removed 26.33 level server blade firmware as well as the 26.31 level firmware
for BL860c i2 NB54000c/c-cg and 26.30 level firmware for rx2800 i2 NS2200
and NS2100 because these are no longer the recommended levels.
13 September
2012
546227-021
Updated for these changes:6 August 2012546227-020
• Added references to two Hotstuffs: HS03168A NB54000c %102536 Halt
and Blade Firmware Fix and HS03175 NB54000c Blade iLO Hang and
Firmware Fix.
• Updated the following in “NonStop Supported Levels for J06.04–J06.17 and
H06.15–H06.28 for Firmware Not Delivered on the SUT ” (page 12):
◦ Revised the title for J06.14 and H06.25.
◦ Onboard Administrator — added the 3.56 recommended level to both
412142-B21 and 456204-B21, and changed the note to clarify which
versions are supported for which platforms.
◦ UPS (HP R12000/3) — added the 2.04 recommended level
◦ UPS SNMP/Web card (R5500XR only).
– Non-RoHS compliant — added 3.36 recommended level.
– RoHS compliant — added 4.36 recommended level.
◦ UPS management module (HP R5000) — added 1.01.002 recommended
level with the explanation that the external download location is not yet
available. Authorized service providers are advised to see FCO#2012002.
◦ Interconnect Ethernet blade switch (C7000) — corrected the download
location for the 5.2.7 recommended level so that both the boot image
and firmware image URLs are listed.
◦ ProCurve maintenance switch (2524) — corrected the previous
recommended level.
◦ BL860c i2 (NB54000c) server blade — added the 26.33 recommended
level and fixed the download link location for the 26.31 level. The URL
changed since the previous revision of this document.
◦ rx2800 i2 (NS2200) — added the 26.33 recommended level and fixed
the download link location for the 26.21 recommended level. The URL
changed since the previous revision of this document.
◦ Added an entry for rx2800 i2 (NS2100)
• Added the new “SUT Delivered NonStop Firmware Levels for J06.14 and
H06.25” (page 26). Edited this section to describe differences from the
previous RVU:
◦ Updated the D2700 level to 0144 and updated the associated T0841
SAS Disk Enclosure SPR level to AAF.
◦ Updated the CLIM Smart Array Controller to AAC for a packaging script
change only. The P410i firmware level has not changed.
◦ Added an entry for CLIM HCA (MT2642B).
◦ Added CLIM NIC (nc382i and nc382T) firmware levels.
Older New and Changed Information Entries 77