NonStop Firmware Matrices

ChangesDateVersion
• Made the following changes in “Valid System Firmware and HSS
Combinations” (page 50):
◦ Documented the T8004 BAA SPR in multiple tables.
◦ Added a note about firmware to reduce the occurrence of %102536 halts
and to fix an iLO firmware hang issue for NB54000c and NB54000c-cg
systems.
◦ Reorganized the NB50000c and NB50000c-cg table and added a note
indicating that T8004^AAU has been tested and has been found
compatible with 4.05 and 4.11SFW releases for NB50000 platforms.
◦ Added a section for the NS2100 (rx2800 i2).
◦ Added a note recommending that all NS2200, NS2200T, and NS2200ST
servers receive the system firmware bundle version 26.33 update to fix
an iLO firmware hang issue.
• Made these changes to “Identification of BL860c i4, BL860c i2, rx2800 i2,
and rx2800 i4 Server Firmware Versions” (page 54):
◦ Added 26.33 bundle version number information for BL860c i2.
◦ Added 26.33 bundle version number information for rx2800 i2, and
corrected entry for 26.21 to 01.50.02.
• Added a few clarifications to “Supplementary Steps for Updating Firmware
Components Not Delivered on the SUT” (page 57).
Updated for these changes:18 April 2012546227-019
• Documented the 26.31 BL860c i2 firmware level.
• Documented the 26.30 rx2800 i2 firmware level.
• Added a note to the Onboard Administrator entry clarifying which version
should be used if an update is required.
• Added a note referencing HS03123 for information about T8004^AAR.
• Added a note regarding the compatibility of T8004^AAM with 3.01, 4.05,
and 4.25 SFW releases for NB50000 platforms.
• Updated and clarified which systems have system firmware delivered on the
HSS T8004 Boot CD and which ones have it delivered on the NSC Installer
DVD.
• Minor formatting and grammatical changes are not marked with change
bars.
Updated for these changes:8 February 2012546227-018
• Added “SUT Delivered NonStop Firmware Levels for J06.13 and H06.24”
(page 28)
• Added notes to every section on SUT delivered NonStop firmware levels
regarding the importance of performing the OSM Service Connection Initialize
Default Firmware File Names action on the system before updating BMC,
HSS, PAL/SAL, or Primitive State firmware.
• Updated the following in “NonStop Supported Levels for J06.04–J06.17 and
H06.15–H06.28 for Firmware Not Delivered on the SUT ” (page 12):
◦ Revised the title for J06.13 and H06.24.
◦ Alarm panel — updated to 1.0F.11 supported level.
◦ UPS SNMP/Web card (R5500XR only).
– Non-RoHS compliant — added 3.34 supported level.
– RoHS compliant — added 4.34 supported level.
78 Older New and Changed Information Entries