NonStop Firmware Matrices

ChangesDateVersion
◦ Added recommended level for new UPS (HP R5000).
◦ Added recommended level for new UPS management module (HP R5000).
◦ Interconnect Ethernet blade switch (C7000) — added 5.2.7 supported
level.
◦ BL860c i2 (NB54000c) server blade — added 26.11 recommended level.
◦ rx2800 i2 (NS2200) — added 26.21 recommended level.
◦ rx2660 system (NS3000AC — added 4.15A recommended level.
◦ Added NonStop system types to some NonStop firmware component
descriptions.
◦ Made various updates for URLs that have changed since the previous
revision of this document.
◦ Added links to supplementary steps for updating firmware on switches.
◦ Added links to “Valid System Firmware and HSS Combinations” (page
50).
• Changed the following in “Valid System Firmware and HSS Combinations”
(page 50)
◦ Replaced BL860c i2 and rx2800 i2 system firmware versions with server
firmware bundle versions and linked to the new “Identification of BL860c
i4, BL860c i2, rx2800 i2, and rx2800 i4 Server Firmware Versions”
(page 54).
◦ BL860c i2 — revised the December 2010 server firmware bundle version
to 21.08 and the SPR revision from AAR to AAT
◦ BL860c — revised the December 2010 SPR revision from AAR to AAT
• Corrected CLIM SAS HBA T0842 H01 AAD Sc08e FW for J06.12 to
05.00.13.00.
• Added a reference to Troubleshooting Tips for HP GbE2c or GbE2c L2/L3
Switches for authorized service providers for issues related to accessing the
switch.
• Added a note that for BL860c firmware, setting the MPS optimization switch
is not needed for NonStop systems.
• Updated “Valid System Firmware and HSS Combinations” (page 50) to
indicate which existing HSS versions support new system firmware.
• Updated “Using the HP Business Support Center or the HP Support Center to
Download Firmware Components Not Delivered on the SUT” (page 76) for
the HP Support Center and for finding required versions that might not be
the latest listed.
• Added “Identification of BL860c i4, BL860c i2, rx2800 i2, and rx2800 i4
Server Firmware Versions” (page 54), “Updating Interconnect Ethernet Blade
Switch (C7000) Firmware” (page 68), and “Updating ProCurve Maintenance
Switch Firmware” (page 72).
Updated the following in “NonStop Supported Levels for J06.04–J06.17 and
H06.15–H06.28 for Firmware Not Delivered on the SUT ” (page 12):
12 August 2011546227-017
• Revised the title for J06.12 and H06.23
• Alarm panel — added the 1.OF supported level with a footnote stating the
download location is currently unavailable
Older New and Changed Information Entries 79