NonStop Firmware Matrices

ChangesDateVersion
• BL860c i2 — added the 26.05 supported level with a footnote to reference
the firmware bundle's Release Notes on the BSC for the system firmware
version
• DC Maintenance Switch — added the 4.1.11 supported level and download
and upgrade instructions
• Onboard Administrator — added the 3.31 supported level to both
412142-B21 and 456204-B21
• ProCurve maintenance switch J9019B (2510B-24) — added the Q.11.26
supported level
• rx2800 i2 — added this new firmware component with a footnote to reference
the firmware bundle's Release Notes on the BSC for the system firmware
version
• UPS management module (R5500XR and R12000/3) — added the 2.1.11
supported level
• HP XP20000/24000 Disk Arrays — revised the supported levels
Added “SUT Delivered NonStop Firmware Levels for J06.12 and H06.23” (page
31)
Updated the following in “Valid System Firmware and HSS Combinations” (page
50):
• NB54000c and NB54000c-cg (BL860c i2):
Added a footnote specifying the BSC firmware bundle for the 01.24
system firmware version (Dec 2010, AAT SPR revision)
◦
◦ Added the 01.72 system firmware version (May 2011, AAU SPR revision)
with a footnote specifying the BSC firmware bundle
• NB50000c and NB50000c-cg (BL860c) — added the 04.25 system firmware
version (Dec 2010, AAU SPR revision)
• NS5000T and NS5000CG (cx2620) — Added footnote to System Firmware
Version and revised the SPR Revision
• NS3000AC (rx2660) — Added footnotes to System Firmware Version and
SPR Revision
• Added “NS2200, NS2200T, and NS2200ST (rx2800 i2)” (page 52) (May
2011, AAU SPR revision) with a footnote specifying the BSC firmware bundle
• NS1200 (rx2660) — Added footnotes to System Firmware Version and SPR
Revision
• NS1000 (rx2620) — Added footnotes to System Firmware Version
Added “Updating BL860c i2 Blade System Firmware” (page 59)
Revised Updating BL860c i2 Blade Firmware on the J06.11 RVU (Version 26.34)
for the 01.24 system firmware version
Added “Updating NS1000 (rx2620) Blade Firmware” (page 71)
Revised “Using the HP Business Support Center or the HP Support Center to
Download Firmware Components Not Delivered on the SUT” (page 76) for
BL860c i2
Updated NonStop Technical Library references from docs.hp.com to http://
www.hp.com/go/nonstop-docs
Updated the following in “Valid System Firmware and HSS Combinations” (page
50):
1 July 2011546227-016
• BL860c i2 — revised the December 2010 system firmware version from
K21.08 to 01.24 to and the SPR revision from AAR to AAT.
• BL860c — revised the December 2010 SPR revision from AAR to AAT.
80 Older New and Changed Information Entries