NonStop Firmware Matrices

ChangesDateVersion
• Changed the scope of this document to indicate supported and recommended
levels of NonStop firmware that is not delivered on the SUT.
• Advised against installing any firmware level that is not listed in this document.
• Added references to Support Note S09039B T0853 CLIM DVD & RVU
COMPATIBILITY for information about the compatibility of T0853 CLIM DVDs
with NonStop RVUs.
• Clarified the CLIM BIOS firmware level by adding the format displayed by
OSM.
• Corrected the M8390 firmware level for J06.08 and H06.19 and J06.07
and H06.18 SUTs.
• Removed CLIM OS and CLIM SNMP entries. T0853 includes T0691, T0692,
T0830, and its levels are documented in Support Note S09039B T0853
CLIM DVD & RVU COMPATIBILITY.
• Made minor editorial changes (not marked).
Updated for the following:1 October 2009546227-005
• Added XP firmware levels.
• Changed matrixes to matrices in the title.
Updated for the following:21 September
2009
546227-004
• Renamed from Minimum Version Levels for NonStop BladeSystem Firmware
That is Not Delivered on the SUT.
• Added maximum version levels verified for compatibility by release for
NonStop firmware that is not delivered on the SUT.
• Added firmware version levels delivered on the SUT by release.
• Changed the download location for the minimum UPS (HP R5500XR) firmware
available for download.
• Changed entries for the Interconnect Ethernet blade switch to include both
boot image upgrade and firmware.
• Changed the recommended OA firmware level for all RVUs to 2.60.
• Corrected the description of the minimum firmware level for the BL860c blade.
• Made minor edits and clarifications to entries for minimum firmware levels.
These have not been marked with change bars.
• Removed hardware safety and compliance information.
• Alphabetized entries.
Changed the name of some components:28 May 2009546227-003
• Changed C7000 Interconnect Ethernet Switch to Interconnect Ethernet Blade
Switch.
• Replaced Server Blade iLO 2, Server Blade BMC, and Server Blade System
entries with BL860c Blade.
• Added ProCurve to the Maintenance Switch component name.
• Added (HP R12000/3) to the name of the UPS.
Added entries for:
• DC maintenance switch (BladeSystem CG)
• Alarm panel
• UPS (HP R5500XR)
• UPS management module (R5500XR and R12000/3)
• UPS SNMP/Web card (R5500XR only)
Updated firmware level for Onboard Administrator.
Updated Safety and Compliance statement.
Older New and Changed Information Entries 83