Disk Load Balancing, Fault Tolerance, and Configuration Limits for NonStop Systems

References
Configuration:
S-series system (pre-G06.05) with S-series I/O enclosures
Document:
Support Note S97086A on G-series Disk Load Balancing
Configuration:
S-series system (G06.05-G06.22) with S-series I/O enclosures
Documents:
Support Note S99056 on G-series Enclosure Interleaving
Manual 529937, SCF Reference Manual for the Storage Subsystem
Configuration:
S-series system with IOAME connected to FCDM and ESS disks
Documents:
Manual 528254 on FCSA Installation and Support
Manual 528764 on Modular I/O Installation and Configuration
Configuration:
NS-series system with IOAME and S-series I/O enclosures
Documents:
Manual 529567 on Integrity NonStop NS-Series Planning
Flexible Disk Configuration (FDC) on HP Integrity NonStop Systems
Configuration:
NS-series or NB-series system with CLIMs and MSA70 enclosures
Document:
Manual 544999 on NonStop CLIM Installation and Configuration
Configuration:
NB-series system with CLIMs and IOAMEs
Document:
Flexible Disk Configuration (FDC) on HP Integrity NonStop BladeSystems
Technology for better business outcomes
© Copyright 2009 Hewlett-Packard Development Company, L.P. The information
contained herein is subject to change without notice. The only warranties for HP
products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
Linux is a U.S. registered trademark of Linus Torvalds. Microsoft and Windows are
U.S. registered trademarks of Microsoft Corporation. UNIX is a registered
trademark of The Open Group.
4AA2-3322ENW, December 2008
576166-001 Assigned April 2009