How OSM Replaces TSM and the Guided Procedures

How OSM Replaces TSM and the Guided
Procedures
Beginning with the G06.21 RVU, the HP NonStop Open Service Management (OSM)
package can be used instead of TSM to perform system management and monitoring
tasks.
Over time, support for new products and new functions will be provided by OSM but
not by TSM.
This topic describes the OSM equivalents to many TSM procedures.
OSM Guided Procedures
Some former TSM guided procedures are replaced by OSM actions. The guided
procedures that remain are launched by OSM actions, instead of by the guided
procedure interface.
TSM Procedure OSM Equivalent
Replace PMF, IOMF, SNDA, SEB or
MSEB
Use the OSM Service Connection Replace
action on the CRU to be replaced.
Configure a ServerNet node
Use the OSM Service Connection Add Node
to ServerNet Cluster action on the System
object.
Replace switch component
Use the OSM Service Connection Replace
action on the switch component to be replaced.
Replace power supply
Use the OSM Service Connection Replace
action on the power supply to be replaced.
SWAN Fast Firmware Update
Use the OSM Service Connection
Multi-Resource Actions dialog, select multiple
SWAN 2 CLIPs, and select the Firmware
Update action.
Troubleshoot ServerNet fabric
Use the External Loopback Test action on the
ServerNet PIC of an IOMF2 or an MSEB CRU.
Add switch
Use the Update Topology action on the
ServerNet Cluster object in conjunction with
documented procedures.
Update switch
Use the OSM Service Connection Firmware
Update and Configuration Update.