K-Series to S-Series Differences

OUTFILE $ZHOME, STARTUPMSG "<BCKP-CPU>; AUTOSTOP -1"
=========================================================================
== CLCI TACL
=========================================================================
ADD PROCESS #CLCI-TACL, NAME $CLCI, PRIORITY 199, AUTORESTART 10, &
PROGRAM $SYSTEM.SYSTEM.TACL, PRIMARYCPU 0, BACKUPCPU 1, TYPE OTHER, &
STARTMODE MANUAL, HOMETERM $YMIOP.#CLCI, INFILE $YMIOP.#CLCI, &
OUTFILE $YMIOP.#CLCI, STARTUPMSG "<BCKP-CPU>"
== Start QIO, WAN Manager, etc.
=========================================================================
START #QIOMON
START #ZZLAN
START #ZZWAN
START #SCP
DELAY 60
========================================================================= ==
== This section adds a MIOE adapters into slots 1.1.50 and 1.1.55.
== TSM will configure the TCP/IP processes for these shared adapters.
==
=========================================================================
ASSUME SUBSYS $ZZLAN
ADD ADAPTER MIOE0, TYPE MIOE, LOCATION (1,1,50), ACCESSLIST (0,1)
START ADAPTER MIOE0, SUB ALL
ADD LIF LANX, PIF MIOE0.0.A
START LIF LANX
ADD ADAPTER MIOE1, TYPE MIOE, LOCATION (1,1,55), ACCESSLIST (1,0)
START ADAPTER MIOE1, SUB ALL
ADD LIF LANY, PIF MIOE1.0.A
START LIF LANY
=========================================================================
==
== The following section was taken from TSMAUTO's ADDTOSCF & ADDTCPIP
==
=========================================================================
== This section adds the TSM processes that configure and start up
== TCP IP's for the LANX and LANY LIF's. These are TACL's that will
== use IN files INIT0 and INIT1 to do the deed.
ADD PROCESS $ZZKRN.TSM-ZTCP0, &
AUTORESTART 0, &
DEFAULTVOL $SYSTEM.ZSERVICE, &
HIGHPIN ON, &
HOMETERM $ZHOME, &
NAME $TSMM0, &
CPU 0, &
PRIORITY 150, &
PROGRAM $SYSTEM.SYSTEM.TACL, &
INFILE $SYSTEM.ZTSM.INIT0, &
STARTMODE SYSTEM, &
STARTUPMSG "01", &
USERID SUPER.SUPER