K-Series to S-Series Differences

ADD DISK $D0213, PRIMARYLOCATION (02,1,13), MIRRORLOCATION (02,1,14)
ADD DISK $D0215, PRIMARYLOCATION (02,1,15), MIRRORLOCATION (02,1,16)
ADD DISK $D0217, PRIMARYLOCATION (02,1,17), MIRRORLOCATION (02,1,18)
==**********************************************************************
==
== Group 11
==
==**********************************************************************
ADD DISK $D1101, PRIMARYLOCATION (11,1,1), MIRRORLOCATION (11,1,2)
ADD DISK $D1103, PRIMARYLOCATION (11,1,3), MIRRORLOCATION (11,1,4)
ADD DISK $D1105, PRIMARYLOCATION (11,1,5), MIRRORLOCATION (11,1,6)
ADD DISK $D1107, PRIMARYLOCATION (11,1,7), MIRRORLOCATION (11,1,8)
ADD DISK $D1111, PRIMARYLOCATION (11,1,11), MIRRORLOCATION (11,1,12)
ADD DISK $D1113, PRIMARYLOCATION (11,1,13), MIRRORLOCATION (11,1,14)
ADD DISK $D1115, PRIMARYLOCATION (11,1,15), MIRRORLOCATION (11,1,16)
ADD DISK $D1117, PRIMARYLOCATION (11,1,17), MIRRORLOCATION (11,1,18)
==**********************************************************************
START DISK $DSMSCM
START DISK $AUDIT
START DISK $D*
==**********************************************************************
== Add Tape drive(s)
ADD TAPE $T0150 ,LOCATION (01,1,50)
ADD TAPE $T0155 ,LOCATION (01,1,55)
ADD TAPE $T0250 ,LOCATION (02,1,50)
ADD TAPE $T0255 ,LOCATION (02,1,55)
ADD TAPE $T1150 ,LOCATION (11,1,50)
ADD TAPE $T1155 ,LOCATION (11,1,55)
START TAPE $*
========================================================================
==
== This section adds 2 E4SA (4-Port Ethernet) adapters as follows:
==
== SLOT NAME CPUS LIF TCPIP IP Address
== ------ ----- ------- ----- ------ ---------------
== 1.1.53 E0153 (00,01) L018 $ZB018 192.231.036.099
== L019 $ZB019 192.231.036.100
== L01A $ZB01A 192.168.002.099
== L01B $ZB01B 192.168.002.100
==
== 1.1.54 E0154 (01,00) L01C $ZB01C 192.168.003.099
== L01D $ZB01D 192.168.003.100
== L01E $ZB01E 192.168.004.099
== L01F $ZB01F 192.168.004.100
==
==
== SUPPORT NOTE S97028
== S7000/S70000 DEFAULT NAMING CONVENTION FROM MANUFACTURING
== 02 JUN 97
==
==
== SUMMARY:
== A naming convention for peripheral and communication devices is now
== being used during Manufacturing build of S7000/S70000 systems. The
== naming convention relates the logical names to the physical location
== of the devices. Knowledge of this naming convention could be helpful
== during initial installation and bringup of a S7000/S70000 system.
== Please note that these conventions do not apply to the TSM related
== processes (MIOE0, MIOE1, LANX, LANY, $ZTCP0, $ZTCP1, $ZTNP0, $ZTNP1,
== $ZPRP0, and $ZPRP1).