LTO Media Handling Guide White Paper

HP LTO Media Handling Guide
6/22/2010 6 of 10 628389-001
Barcode Labels
1. Place labels only in the recessed area adjacent to the write protection switch.
Never place labels on the top, bottom sides or rear of the cartridge, they
can cause loader faults and interfere with normal operations. Such labels can
come off inside the equipment causing damage.
2. Always inspect cartridges for incorrect or improperly attached labels.
3. Never erase information on a cartridge label, always replace the label.
Note. Barcode labels may be placed on the media with the alphanumeric
characters on the left or the right.
Barcode Label Installation (LTO)