OSM Alarm Summary
OSM Alarm Summary – 541946-001 2
Table of Contents
Section 1 OSM Alarms Common to HP NonStop Servers
1.1 Power-on Self Test Failed
1.2 Incorrect Logical Configuration
1.3 LBU down
1.4 Fault State
1.5 Correctable Secondary Cache Errors (Excessive)
1.6 Correctable Secondary Cache Errors (Intermittent)
1.7 Correctable Memory Error
1.8 Uncorrectable Memory Error
1.9 Hardware Error Freeze
1.10 Processor Hung
1.11 Software Halt
1.12 No Memory
1.13 SCSI Boot Code Update Failure
1.14 Millicode Halt
1.15 Processor Down
1.16 Missing Power Monitor and Control Unit
1.17 Missing Fan
1.18 Missing Battery
1.19 Missing Power Supply
1.20 Unknown CRU
1.21 Hardware Error
1.22 CRU Initialization Failed
1.23 CRU ServerNet Configuration Error
1.24 ASIC Freeze Error
1.25 Invalid Power Measurement
1.26 Bulk Fault
1.27 Invalid Temperature Measurement
1.28 Temperature Out of Limits
1.29 Down-rev MSEB NNA PIC
1.30 Missing Modular ServerNet Expansion Board
1.31 Missing NNA Plug-in Card
1.32 Node Plugged into Wrong Port of ServerNet Switch
1.33 X Fabric Not Connected to the Same ServerNet Switch Port as Y Fabric
1.34 NNA Verify Failure
1.35 Service Processor I/O Library Routine Call Error
1.36 Invalid MSEB Configuration Record
1.37 MSEB Configuration Record Fetch Error
1.38 ServerNet Services Initialization Error
1.39 Invalid Fabric Parameter Error
1.40 IBC Driver Limit of ServerNet Switches Exceeded
1.41 NNA Programming Error
1.42 Node Plugged Into Wrong Port of Switch
1.43 SMC Driver Switch Installation Error
1.44 SMC Driver Unable to Obtain Locked Memory
1.45 SMC Driver Returned Error
1.46 Node Plugged Into an Already Used Port of Switch
1.47 ServerNet Path Test Failed
1.48 ServerNet Path Down in Group <G>, Module 1, Slot <S>
1.49 Persistent Backpressure in Processor <P>
1.50 ServerNet Router Port Error
1.51 ServerNet Router 2 Port Exception
1.52 Automatic Redundant Power Scrub Test Not Run
1.53 Redundant Power Scrub Test Failed
1.54 Power Problem
1.55 Module Not Responding
1.56 Firmware Stuck in a Transient State
1.57 Down-rev Firmware
1.58 Down-rev Configuration
1.59 Down-rev FPGA