OSM Alarm Summary

OSM Alarm Summary – 541946-001 4
1.123 Invalid Firmware Response
1.124 Missing Switch Module
1.125 Configuration Version Mismatch Between Neighbor Switches
1.126 Temperature Out of Range
1.127 Invalid MAC Address
1.128 Primary AC Power Failure
1.129 Backup AC Power Failure
1.130 Current Numeric Selector Setting Not in Use by Switch
1.131 Missing Transceiver
1.132 Invalid Transceiver Type
1.133 Switch Connected to Switch-to-Node Port of Neighbor Switch
1.134 Port Number Mismatch Between Neighbor Switches
1.135 Neighbor Switch Ports Not Connected
1.136 Different Switches Connected to Ports in a Multilane Link
1.137 Corrupt Firmware
1.138 Backup Firmware Not Same as Running Firmware
1.139 Factory Default Configuration Loaded
1.140 Corrupt Configuration
1.141 SRAM Memory Test Failure
1.142 FLASH Sector Test Failure
1.143 SEEPROM Checksum Error
1.144 FLASH Program Error
1.145 Power Supply Fan Failure
1.146 Firmware Version Mismatch Between X and Y ServerNet Switches
1.147 Configuration Version Mismatch Between X and Y ServerNet Switches
1.148 ServerNet Switch Router Self Check Error
1.149 ServerNet Switch Internal Stack Overflow
1.150 Invalid Flash ID
1.151 Lower Boot Block Section of FLASH Locked
1.152 Upper Boot Block Section of FLASH Locked
1.153 Link Receive Disabled on ServerNet Switch Port
1.154 Link Transmit Disabled on ServerNet Switch Port
1.155 Packet Receive Disabled on ServerNet Switch Port
1.156 Packet Transmit Disabled on ServerNet Switch Port
1.157 Backup Configuration Not Same as Running Configuration
1.158 Cable Between AC Transfer Switch and ServerNet Switch Disconnected
1.159 Cable Between UPS And AC Transfer Switch Disconnected
1.161 Backup Power Rail Failure
1.162 UPS Not Responding
1.163 UPS Failure
1.164 ServerNet Switch Operating on Battery Power
1.165 Low Battery Voltage
1.166 Battery Failure
1.167 Ground Failure
1.168 Overloaded UPS
1.169 Backfeed Contact Failure
1.170 Low Inverter Voltage
1.171 Insufficient Backup Time on UPS
1.172 Too Many State Transitions
1.173 Too Many ServerNet Switch Automatic Resets Because of Backpressure
1.174 ServerNet Switch Not Responding
1.175 Missing ServerNet Switch
1.176 Invalid Fabric Setting
1.177 Invalid ServerNet Switch Control Block
1.178 Invalid ServerNet Switch PIC Type
1.179 Invalid GUID
1.180 Configuration Tag Mismatch Between X and Y ServerNet Switches
1.181 Too Many SS7TE3 SACs
1.182 Wrong SAC Type
1.183 Unknown SAC Type
1.184 Adapter Type Mismatch
1.185 SWAN Kernel Error
1.186 Fan Failure
1.187 Power Supply Failure