PMF CRUs That Can Be Upgraded Online and Coexist Permanently in Mixed Systems

1954 (S72000)
1970 (S74000)
1971 (S76000)
1973 (S78000)
1972 (S86000)
1974 (S88000)
Any combination of S72000, S74000, S76000, S78000, S86000, or S88000 can
coexist.
Notes:
When the first S72000 PMF CRU in an enclosure is replaced with an S76000 or
later, or when an S7400 PMF CRU is replaced with an S7600 or later, an OSM or
TSM ServerNet path down alarm is generated. This normal condition is created
by router chip protocol differences. Ignore these alarms and messages. Replace
the other PMF CRU. When both PMF CRUs in an enclosure have been replaced,
the system returns to normal, and the alarms disappear.
Do not attempt to upgrade to unsupported configurations.
PMF CRUs That Must be Upgraded Offline
S7000 PMF CRUs cannot coexist in a system, even temporarily, with any other
model of PMF CRU.
S70000 PMF CRUs cannot coexist, even temporarily, with S76000, S86000, or
later PMF CRUs.
Online upgrading of S7400 to S70000, S72000, or S74000 is not supported.
Note: Online upgrading of S7400, S7600, and S7800 to S76000, S86000, and later is
supported.
Processor Codes for CONFTEXT File ALLPROCESSORS Statement
S7000 (NSR-W)
S7400 (NSR-D)
S7600 (NSR-E)
S7800 (NSR-J)
S70000 (NSR-C for G06.24 and later)
S70000 (NSR-G for G06.23 and earlier)
S72000 (NSR-T)
S74000 (NSR-V)
S76000 (NSR-X)
S86000 (NSR-Y)
S78000 (NSR-H)
S88000 (NSR-Z)
For S700, See the NonStop Planning and Configuration Guide, Appendix B.
Note: On G06.24 and later, NSR-C supports S70000 through S78000 with the old file
set. The old file set does not support S88000. S88000 will halt if NSR-C is entered.