ServerNet Cluster Web

The height of the cluster switch enclosure is listed as 37.6 in. (95.5 cm) in
the Switch Enclosure Dimensions table in Section 2, "Planning for
Installation." The correct height of the switch enclosure is 20.5 in. (52 cm).
❍
October 1, 2001
Known problems with Documentation. Added the following
corrections:
The online help file (SWITCH.CHM) that is included with the TSM 2001C
client software is the wrong file. TSM 2001C contains Version 1.0 of the
online help for Replace Switch, which is dated August 2, 2000. The correct
online help version for TSM 2001C is Version 3.0, dated March 28, 2001.
❍
A caution on page 1-2 of the Himalaya S-Series System Expansion and
Reduction Guide incorrectly states that if a system you want to resize is a
member of a ServerNet cluster and you want to perform this expansion
online, you must first remove the system from the cluster.
❍
F1 help is not available for SCL (ServerNet cluster) and SMN (external
ServerNet SAN) subsystem events displayed in the TSM EMS Event
Viewer Application. TSM client software versions 10.0 through Compaq
TSM 2001C are affected. These client software versions support releases
G06.09 through G06.13.
❍
●
July 17, 2001
Known problems with Documentation. Added the following
corrections:
In the procedure to merge two ServerNet clusters that use a star topology
(one cluster switch per fabric), additional steps are needed to ensure
successful merging. The procedure that needs modification appears in
Section 4 of the G06.12 versions (429153-001 and 520371-001) of the
ServerNet Cluster Manual.
❍
●
June 22, 2001
Starting with G06.12, ServerNet Cluster has increased support from 8 to 16
servers. These servers can be connected in a group, or ServerNet cluster.
●
Known problems with Documentation. Added the following
corrections:
Added information about the Missing Remote ServerNet Switch alarm or
time limits for connecting the four-lane links.
❍
The Loopback Plugs topic lists an incorrect part number (U11674) for the
ECL loopback plug.
❍
●