Changing the DHCP, DNS, or BOOTP Server from CLIMs to System Consoles

New and Changed Information in This Edition
ChangesDateVersion
March 2014517585-006
• Changed references of “NonStop BladeSystems and
NS2200 series systems” to “NonStop Systems running
J-series software (except NonStop NS2000 series systems)”
• Added back references to the CLIM Boot Service
Configuration Wizard that were removed in -004.
• Added procedures for creating DHCP and DNS configuration
file.
7 March 2012517585-005
7 February 2012517585-004
• Replaced references to the CLIM Boot Service Configuration
Wizard with the NonStop Maintenance LAN DHCP DNS
Configuration Wizard.
• In the Minimum Requirements section, updated the required
version of the NonStop Maintenance LAN DHCP DNS
Configuration Wizard to T0634 G06 ABB or later and the
required version of the OSM Low-Level Link to T0633 G07
ABN which are delivered on NSC Installer DVD,
S7X-SWV2/HNSC-SWV2, Update 17 or later.
• In the Minimum Requirements section, updated the required
version of Windows to Windows 2003 or later authorized
for NonStop System Consoles.
• Added the section “Enabling DHCP and DNS on System
Consoles.”
• Added text indicating that NS2200 series systems are
supported by this document.
• Corrected part number for entries in this table.
9 August 2010517585-003
• Added a Caution indicating that DHCP/DNS/BOOTP server
functionality should be configured on two (primary and
backup) system consoles or two designated CLIMs for
fault-tolerance, but should exist on no more than two.
• Added a missing step for setting the string value of the
Bootfile name.
• Added step for updating the DNS server IP address on the
system console.
• Added step for enabling DNS on the backup system console.
• Corrected step references.
24 April 2009517585-002
• Changed the title of this document from Changing the HSS
BOOTP Server from CLIMs to System Consoles to Changing
the DHCP, DNS, or BOOTP Server from CLIMs to System
Consoles.
• Added text indicating that BOOTP services exist only on
NonStop BladeSystems.
• Added text indicating that you cannot configure
DHCP/DNS/BOOTP services on a per system basis for
NonStop systems managed by the same system consoles.
• Updated procedures to include DNS server migration from
the CLIM also.
• Updated procedures to indicate that this procedure also
supports H06.16 and all subsequent H-series RVUs.
• Corrected and updated the reference for moving services
functionality to CLIMs to reflect the new title of that procedure.
• In the Requirements section, updated the required version of
the CLIM Boot Service Configuration Wizard to T0634 AAU
New and Changed Information in This Edition 5