Guided Procedures HP Part Number: 529694-012 Published: May 2009
© Copyright 2009 Hewlett-Packard Development Company, L.P. Legal Notice Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s standard commercial license. The information contained herein is subject to change without notice.
Introduction to Guided Procedures Guided configuration, replacement, and troubleshooting procedures are software tools that help you manage and maintain system components. Guided procedures automate some of the steps in complex tasks and prompt you with detailed instructions to perform any required manual steps. Guided procedures include error recovery information and online help systems with detailed manual procedures. Help available within each guided procedure is comprehensive and context-sensitive.
The replace action for 4PSE is available with H02 AAN and later versions of T0682 for NonStop NS 14000 servers. The replace action for a Power Supply in an NS1000 blade element, and the Bring Up and Balance Storage Paths and Check Storage Dependence on ServerNet Fabric guided procedures are available with T0682 H02 AAP and later versions of T0682. The replace and firmware update actions for NS1000 blade element FRUs are available with T0682H02 AAU and later versions of T0682.
Guided Procedure Replace Switch Component Earliest TSM Client Software Version Minimum TSM Server Required Guides You Through the Replacement of This CRU or FRU 10.0 T7945AAS ServerNet II Switch, AC transfer switch, or UPS N/A IOMF CRU, PMF CRU or FRU, power supply, or ServerNet/DA in a system running TSM server version T7945AAW (shipped with G06.12) or earlier Guided Replacement 9.
occasions, which can result in an inability to run a guided procedure because it cannot overwrite or delete files created previously.
