Guided Procedures

Guides You Through the Replacement
of This CRU or FRU
Minimum TSM Server
Required
Earliest TSM Client
Software VersionGuided Procedure
ServerNet II Switch, AC transfer
switch, or UPS
T7945AAS10.0Replace Switch
Component
IOMF CRU, PMF CRU or FRU, power
supply, or ServerNet/DA in a system
N/A9.0Guided Replacement
Toolkit (GRT)
running TSM server version
T7945AAW (shipped with G06.12) or
earlier
Guided Configuration Tools
The following guided procedures are in the Guided Configuration Tools program group. WAN
Wizard Pro, however, is available in the HP WAN Wizard Pro program group for TSM 2003A
and later.
Guides You Through
Minimum TSM Server
Required
Earliest TSM Client
Software VersionGuided Procedure
Adding NonStop Cluster Switches and
changing the topology of existing
ServerNet clusters
T7945AAW2001BAdd Switch
Preparing a NonStop Sseries server to
become a node in an HP NonStop
ServerNet cluster
T7945AAS10.0Configure ServerNet
Node
Configuring SWAN concentrators, WAN
subsystem devices, and LAN adapters
N/A9.0WAN Wizard Pro
Guided Troubleshooting Tools
The following guided procedures are in the Guided Troubleshooting Tools program group:
Guides the Trained Service Provider
Through
Minimum TSM Server
Required
Earliest TSM Client
Software VersionGuided Procedure
Diagnosing problems that affect
ServerNet communications between
enclosures within a system.
T7945AAX2001CTroubleshoot
ServerNet Fabric
TSM Service Application Guided Procedures
The following guided procedures can be launched only from the TSM Service Application. No
Start menu entry is available.
The following guided procedures are in the Guided Troubleshooting Tools program group:
Guides the Trained Service Provider
Through
Minimum TSM Server
Required
Earliest TSM Client
Software VersionGuided Procedure
Updating either the firmware or
configuration for a cluster switch
T7945AAW2001BUpdate Switch
Updating the firmware for the CLIPs
in a SWAN concentrator
T7945AAX2001CSWAN Fast Firmware
Update
For TSM software versions prior to T8154AAX and T7945AAX (the TSM client and server), see
SUPPORT NOTE S02028: Securing Guided Procedures Guidelines for an explanation of how to
avoid problems created by running guided procedures using different logons on different
WAN Wizard Pro and Guided Procedures Installed With TSM 5