Powering a Server Off and On

Powering On a Server
After the server shuts down the power supplies and powers off all CRUs, you can
power the server on again as follows:
1 Locate the power-on push button above the handle on either processor
multifunction (PMF) customer replaceable unit (CRU) in group 01 (the group
containing processors 0 and 1).
2 Press and hold down the power-on push button for at least one second.
3 Check fan activity by placing your hand near the outlet grill located above
slots 51 through 54 and between slots 50 and 55 of the enclosure.
4 Make sure that the green LEDs are lit and that the amber LEDs are not lit.
5 You can now start your system.
For starting a system, see OSM or TSM online help and the NonStop S-Series
Operations Guide. For G06.16 and earlier, see the Himalaya S-Series Operations
Guide.