Replacing a TRSA CRU

Example: Determining the TCP/IP Processes
and IP Addresses Associated With the LIF on a
TRSA CRU
This is an example of the SCF INFO SUBNET command:
-> INFO SUBNET $*.*
TCPIP Info SUBNET \JULIE.$ZTC01.*
Name Devicename *IPADDRESS TYPE *SUBNETMASK SuName QIO *R
#LOOP0 \NOSYS.$NOIOP 127.0.0.1 LOOP-BACK %HFF000000 OFF N
#SN1 \JULIE.$L018 172.16.35.15 SNAP %HFFFFFF00 ON N
The following information should help you interpret the display:
The TCP/IP process name is displayed in the first line of output●
The subnet name is displayed in the Name column●
The logical interface (LIF) name is displayed in the Devicename column●
The Internet Protocol (IP) address is displayed in the IPADDRESS column●
Note: You can easily scan for Token-Ring ServerNet adapter (TRSA) CRU subnets
by looking in the TYPE column. TRSA CRU subnets are displayed as type SNAP.
In this example, which is partial output, the TRSA CRU LIF named L018 is associated
with the subnet named #SN1 on the TCP/IP process named $ZTC01 and has the IP
address 172.16.35.15.