Replacing a TRSA CRU

Verifying That the Communications Lines
Using a TRSA CRU Are Started
To verify that a TCP/IP subnet is started:
Use the SCF STATUS SUBNET command:
STATUS SUBNET
$<tcpip-process-name>.#<subnet-name>
The example shows the output of this command.
To verify that an IPXPROTO process is started:
Use the SCF STATUS PROCESS command:
STATUS PROCESS $<process-name>
The example shows the output of this command.
To verify that a Port Access Method (PAM) line is started:
Use the SCF STATUS LINE command with the SUB ALL option:
STATUS LINE $<line-name>
The example shows the output of this command.
To verify that a SNAX/TR line is started:
1 Verify the the WAN subsystem input/output process (IOP) is in the
STARTED state.
Use the SCF STATUS DEVICE command:
STATUS DEVICE $ZZWAN.#<device-name>
The example shows the output of this command.
2 Verify that the SNAX/TR line is in the STARTED state.
Use the SCF STATUS LINE command:
STATUS LINE $<line-name>
The example shows the output of this command.
If an object is not in the STARTED state, use the OSM or TSM Event Viewer to check
for an event message in the Event Management Service (EMS) log.