Replacing an AC Power Cord in a Power Shelf

2 Swing the locking bar down until it engages one of the slots on the plug
housing and snaps into place. Do not force the locking bar. If the locking bar
does not engage easily, the plug might not be seated correctly, or you might
have the wrong cable.
Warning: The underside of the locking bar is sharp. Placing your fingers
under the locking bar can result in injury. Failure to fully seat the plug into
the retainer can result in cord damage from the locking bar.
3 Plug the other end of the power cord into the dedicated AC outlet.
4 If the circuit breaker was turned off to do this procedure, turn on the circuit
breaker.
5 Verify that the power LED on the associated power supply is lit.
This completes the power cord replacement procedure.