Replacing an ATM3SA CRU

Example: Determining the Expand Lines That
Use an ATM3SA CRU
This is an example of the SCF INFO LINE command with the DETAIL option for an
Expand-over-ATM line that uses a permanent virtual circuit (PVC):
-> INFO LINE $ATMH, DETAIL
EXPAND Detailed Info LINE $ATMH
*Associatedev...$AM2 *Associatesubdev #IP
Rsize........ 3 *Speed.......... 74666 Delay......... 0:00:00.10
Framesize.... 132 Txwindow....... 7 *Timeinactivity 0:00:00.00
*Maxreconnects 0 *Timerreconnect 0:00:30.00*Aftermaxretries PASSIVE
*Timerprobe 0:00:30.00*Retryprobe..... 3 Startup....... OFF
L2Protocol... Net^Atm ConnEp.........%H30070984 ListenEp...... %H30112778
*CallType..... PVC VPI............ 0 VCI........... 0
*PvcName...... PVC01
The ATM line is shown in the Associatedev field. In this example, the
Expand-over-ATM line named $ATMH uses the ATM line named $AM2.
This is an example of the SCF INFO LINE command with the DETAIL option for an
Expand-over-ATM line that uses a switched virtual circuit (SVC):
->INFO LINE $ATMH1, DETAIL
EXPAND Detailed Info LINE $ATMH1
*Associatedev.. $AM2 *Associatesubdev #IP
Rsize........ 3 *Speed.......... 74666 Delay......... 0:00:00.10
Framesize.... 132 Txwindow....... 7 *Timeinactivity 0:00:00.00
*Maxreconnects 0 *Timerreconnect 0:00:30.00*Aftermaxretries PASSIVE
*Timerprobe 0:00:30.00*Retryprobe..... 3 Startup....... OFF
L2Protocol... Net^Atm ConnEp.........%H30070984 ListenEp...... %H30112778
*CallType..... SVC VPI............ 0 VCI........... 0
*AtmSel....... %H80
*DestAtmAddr.. (ISONSAP:%H47009181000100006170597C0140000C80001000)
The ATM line used is shown in the Associatedev field. In this example, the
Expand-over-ATM line named $ATMH1 uses the ATM line named $AM2.
This is an example of the SCF INFO LINE command with the DETAIL option for an
Expand-over-IP line that uses an ATM3SA CRU:
->INFO LINE $IPYEA,DETAIL
EXPAND Detailed Info LINE $IPYEA
*Associatedev... $ZTC23 *Maxconnects. 0 Delay.... 0:00:00.10
Framesize...... 132 *Speed....... 74666 *Retryprobe 3
*Timerinactivity 0:00:00.00 *Timerprobe.. 0:00:30.00 Txwindow.. 7
*AfterMaxRetries PASSIVE StartUp...... OFF Rsize..... 3
*Timerreconnect. 0:00:30.00 L2Protocol... Net^IP
*DestIpAddr 172.17.203.37 *DestIpPort 2003
*SrcIpAddr 172.17.208.20 *SrcIpAddr 2003
The TCP/IP process used by the Expand-over-IP line is shown in the Associatedev
field and the local Internet Protocol (IP) address is shown in the SrcIpAddr field. In