Manualshelf

Replacing an ATM3SA CRU

ManualsBrandsHP ManualsServerHP Integrity NonStop Service Procedures
11121314151617181920
5 Stop the TCP/IP subnets associated with the Asynchronous Transfer Mode
(ATM) line on the ATM ServerNet adapter (ATM3SA) CRU.
Caution: Make sure that the TACL session from which you are issuing
SCF commands is not running on the one of the subnets that you are about
to stop.
Use the SCF STOP SUBNET command:
STOP SUBNET $<tcpip-process>.#<subnet>
6 Verify that the TCP/IP subnets are in the STOPPED state.
Use the SCF STATUS SUBNET command:
STATUS SUBNET $<tcpip-process>.#<subnet>
The example shows the output of this command.