Replacing an ATM3SA CRU

Starting the Communications Lines That Use
an ATM3SA CRU
1 Start the TCP/IP subnets.
Use the SCF START SUBNET command:
START SUBNET
$<tcpip-process-name>.#<subnet-name>
2 Start the WAN subsystem input/output processes (IOPs).
Use the SCF START DEVICE command:
START DEVICE $ZZWAN.#<device-name>
3 Start the lines.
Use the SCF START LINE command to start a single line:
START LINE $<line-name>
Use the SCF START PATH command to start all the lines in an Expand
multiline path:
START PATH $<path-name>