Replacing an ATM3SA CRU

Using TSM
1 From a system console, launch the TSM Event Viewer Application by doing
one of the following:
From the Start button, select:
For TSM client software Versions 2000A and later:
Start>Programs> Compaq TSM>TSM Event Viewer
❍
For TSM client software Versions 10.0 and earlier:
Start>Programs>TSM Client> TSM Event Viewer
❍
●
Log on to the server using the TSM Service Application and select
Display>Events.
●
Open the TSM Low-Level Link and select Display>Events.●
The TSM EMS Event Viewer dialog box appears.
2 Select File>Log on. The Log on to NSK System dialog box appears.
3 Select a server, type in a NonStop Kernel operating system user ID, and
click OK.
4 From the Setup menu, choose Source criteria.
5 On the Setup Search Criteria Sources tab, under Available Sources,
choose $0, and, if necessary, click Add to add it to the list of Selected
Sources. If there are other sources listed in the Selected Sources list, you
might want to remove them. Select the source you wish to remove, and click
Remove. When you are done, click OK.
Note: You can also select the timeframe and subsystem events you wish
to view.
6 Browse through the event messages that are stored in $0 for information on
when these events were generated.
For detailed information about an event, select the event and from the
Display menu, choose Detail. The Event Detail dialog box appears.
For more information on event messages, see the Operator Messages
Manual.
See the TSM Online User Guide for more information on launching and logging on to
the TSM Event Viewer. See TSM Event Viewer online help for information on using the