Replacing an ATM3SA CRU

Managing the Windows NT Event Viewer
Application Log
The event viewer has 3 logs: an Application log, a Security log, and a System log.
Each log can contain a limited number of entries; for example, 512 KB. The Application
log can hit the maximum size when you are running the TSM service application or
performing a system discovery using the TSM Low-Level Link.
Note: OSM is not supported on workstations running the Windows NT operating
system.
To prevent a log from becoming full, clear or reconfigure the log. You can change the
size of the log and select options such as "Overwrite events as needed" and "Overwrite
events older than xx days." Normally, the default is "Overwrite events older than 7
days."
To clear the NT Application Event Log:
1 Log on as an administrator or a member of the administrator's group.
2 On the task bar, select Start> Programs> Administrative Tools
(Common)> Event Viewer. The Event Viewer window appears.
3 From the log menu, select Application.
4 From the log menu, select Clear All Events. All NT Application events are
cleared from the log file.
5 Close the Event Viewer window.
To configure the NT Application Event Log:
1 On the tool bar, select Status. The Event Viewer window appears.
2 From the log menu, select Application.
3 From the log menu, select Log Settings. The Event Log Settings dialog box
appears.
4 You can increase the size of the log file, and select one of the overwrite
options.
5 Close the Event Viewer window.
For more information, refer to the NT Event Viewer online help.