Replacing an E4SA CRU

4 Determine the PAM lines associated with the LIFs on the E4SA CRU to
be replaced.
Use the SCF INFO LINE command for each PAM line you identified in
Step 3:
INFO LINE $<line-name>
Scan the output for a LIF on the E4SA CRU to be replaced. Make a note
of the PAM lines associated with the LIFs on the E4SA CRU.
The example shows the output of this command.
5 Identify the IPXPROTO processes configured on the system.
Use the SCF NAMES SUBSYS command:
NAMES SUBSYS $ZMGR
The example shows the output of this command.
6 Determine the IPXPROTO processes associated with the LIFs on the
E4SA CRU to be replaced.
Use the SCF INFO PROCESS command for each IPXPROTO process
you identified in Step 5:
INFO PROCESS $<process-name>
Scan the output of the command for each LIF you identified in Step 1 and
then find the associated IPXPROTO processes. Make a note of the
IPXPROTO process names associated with the LIFs on the E4SA CRU.
The example shows the output of this command.
7 Identify the names of Expand-over-IP lines configured on the system.
Use the following SCF LISTDEV command to display the single-line
Expand-over-IP lines:
LISTDEV TYPE 63,0
Use the following SCF LISTDEV command to display the Expand-over-IP
lines that are part of a multiline path:
LISTDEV TYPE 63,2
The example shows the output of these commands.