Replacing an E4SA CRU

Determining the Physical Location of an E4SA
CRU
Use the SCF INFO ADAPTER command:
INFO ADAPTER $ZZLAN.<adapter-name>
Scan the output of the command for the group, module, and slot location.
The example shows the output of this command.
Note: If Ethernet 4 ServerNet adapters (E4SA) CRUs are named using the
manufacturing naming convention, you can easily identify the physical location of the
E4SA CRU by its name as follows:
E<cabid><slot>
where <cabid> is the two-digit number that identifies the enclosure and <slot> is the
actual physical slot number in the enclosure. For example, the E4SA CRU named
E0153 is located in enclosure 01, slot 53.