Replacing an E4SA CRU

Aborting an E4SA CRU

1 Stop access to the logical interfaces (LIFs) associated with the Ethernet 4

ServerNet adapter (E4SA) CRU to be replaced.

Use the SCF ABORT LIF command for each LIF:

ABORT LIF $ZZLAN.<lif-name>

2 Verify that the LIFs associated with the E4SA CRU to be replaced are in

the STOPPED state.

Use the SCF STATUS LIF command:

STATUS LIF $ZZLAN.*

The example shows the output of this command.

3 Abort the E4SA CRU ADAPTER object and its subordinate objects.

You can use either SCF, the OSM Service Connection, or the TSM Service

Application to perform this step.

Note: TSM Service Application T8154AAE (G06.01) or later is required.

Using SCF:

Use the SCF ABORT ADAPTER command with the SUB ALL option:

ABORT ADAPTER $ZZLAN.<adapter-name>, SUB ALL

The SUB ALL option stops the ADAPTER object and its subordinate

objects.

Using OSM or TSM:

In the Tree view, select the E4SA CRU.1.

From the Display menu, choose Actions.2.

Select Abort.3.

Click Perform action.4.