Replacing an E4SA CRU

4 Verify that the SACs are in the STOPPED state.
Use the SCF STATUS SAC command:
STATUS SAC $ZZLAN.<adapter>.*
The example shows the output of this command.
5 Verify that the PIFs are in the STOPPED state.
Use the SCF STATUS PIF command:
STATUS PIF $ZZLAN.<adapter>.*
The example shows the output of this command.
6 Verify that the E4SA CRU ADAPTER object is in the STOPPED state.
Use the SCF STATUS ADAPTER command:
STATUS ADAPTER $ZZLAN.<adapter-name>
The example shows the output of this command.