Replacing an E4SA CRU

Starting an E4SA CRU
1 Start the Ethernet 4 ServerNet adapter (E4SA) CRU ADAPTER object and
its subordinate SAC and PIF objects.
You can use either SCF, the OSM Service Connection, or the TSM Service
Application to perform this step.
Note: TSM Service Application product Version 5.0 with SPR
T7945AAF or later is required.
Using SCF:
Use the SCF START ADAPTER command with the SUB ALL option:
START ADAPTER $ZZLAN.<adapter-name>, SUB ALL
The SUB ALL option starts the ADAPTER object and its subordinate
objects.
Using OSM or TSM:
In the Tree pane, select the E4SA CRU.1.
Select Display> Actions.2.
Click Start.3.
Click Perform action.4.
2 Verify that the E4SA CRU ADAPTER object is in the STARTED state.
Use the SCF STATUS ADAPTER command:
STATUS ADAPTER $ZZLAN.<adapter-name>
The example shows the output of the SCF STATUS ADAPTER command.
3 Verify that the ServerNet addressable controllers (SACs) are in the
STARTED state.
Use the SCF STATUS SAC command:
STATUS SAC $ZZLAN.<adapter-name>.*
The example shows the output of the SCF STATUS SAC command.