Replacing an E4SA CRU

Starting the Communications Lines and SWAN
Concentrators That Use an E4SA CRU
To start a TCP/IP subnet:
Use the following SCF START SUBNET command for conventional
TCP/IP:
START SUBNET
$<tcpip-process-name>.#<subnet-name>
Or use the following SCF START SUBNET command for Parallel Library
TCP/IP:
START SUBNET
$<tcpip-process-name>.*.<subnet-name>
To start an IPXPROTO process:
Use the SCF START PROCESS command:
START PROCESS $<process-name>
To start a Port Access Method (PAM) line:
Use the SCF START LINE command with the SUB ALL option:
START LINE $<line-name>, SUB ALL
The SUB ALL option starts the LINE object and its subordinate objects.
To start an Expand-over-IP line:
1 Start the WAN subsystem input/output process (IOP).
Use the SCF START DEVICE command:
START DEVICE $ZZWAN.#<device-name>
2 Start the line.
Use the SCF START LINE command to start a single line:
START LINE $<line-name>
Use the SCF START PATH command to start all the lines in an Expand
multiline path:
START PATH $<path-name>
To start a ServerNet wide area network (WAN) concentrator and its associated