Replacing an E4SA CRU

Verifying That the Communications Lines and
SWAN Concentrators That Use an E4SA CRU
Are Started
To verify that a TCP/IP subnet is started:
Use the following SCF STATUS SUBNET command for conventional
TCP/IP:
STATUS SUBNET
$<tcpip-process-name>.#<subnet-name>
Use the following SCF STATUS SUBNET command for Parallel Library
TCP/IP:
STATUS SUBNET
$<tcpip-process-name>.*.<subnet-name>
The example shows the output of this command.
To verify that an IPXPROTO process is started:
Use the SCF STATUS PROCESS command:
STATUS PROCESS $<process-name>
The example shows the output of this command.
To verify that a Port Access Method (PAM) line is started:
Use the SCF STATUS LINE command:
STATUS LINE $<line-name>
The example shows the output of this command.
To verify that an Expand-over-IP line is started:
1 Verify that the WAN subsystem IOP is in the STARTED state.
Use the SCF STATUS DEVICE command:
STATUS DEVICE $ZZWAN.#<device-name>
The example shows the output of this command.