Replacing an Internal Disk Drive CRU

4 Use the SCF PRIMARY DISK, FORCED command again to switch the disk
volume back to its primary processor; then use the SCF STATUS DISK
command to verify the operation:
->PRIMARY $DATA17, FORCED
->STATUS $DATA17
STORAGE - Status DISK \TOYS.$DATA17
LDev Primary Backup Mirror MirrorBackup Primary Backup
PID PID
88 *STARTED STARTED *STARTED STARTED 1,266 0,282
->
Note: For G06.10 and earlier, including the FORCED keyword here
ensures the correct processor ownership. For G06.11 and later, the FORCED
keyword is not needed and has no effect.