Replacing an Internal Disk Drive CRU

Resetting and Verifying Nonmirrored Disk
Drive Using SCF
Follow these instructions to reset and verify a non mirrored disk drive. In this example,
the $DATA21 drive has just been replaced and is being prepared for operation.
Use the SCF RESET DISK command; then use the SCF STATUS DISK command to
verify that the disk drive is in the STOPPED state with the substate DOWN.
TACL> SCF RESET $DATA21
->STATUS $DATA21-*
STORAGE - Status DISK \TOYS.$DATA21-*
LDev Path Status State Substate Primary
Backup
PID PID
87 PRIMARY INACTIVE STOPPED DOWN 2,262
3,262
87 BACKUP INACTIVE STOPPED DOWN 2,262
3,262
->