Replacing an Internal Disk Drive CRU

Starting a Nonmirrored Disk Drive With SCF
Follow these instructions to start and verify a nonmirrored disk drive. In this example,
the $DATA21 disk drive has been replaced and is being returned to operation.
Use the SCF START DISK command to start the disk drive; then use the SCF
STATUS DISK command to verify that both paths are in the STARTED state.
TACL> SCF START $DATA21
->STATUS $DATA21-*
STORAGE - Status DISK \TOYS.$DATA21-*
LDev Path Status State Substate Primary Backup
PID PID
87 PRIMARY ACTIVE STARTED 2,262 3,262
87 BACKUP INACTIVE STARTED 2,262 3,262
->