Replacing and Installing Enclosure Doors and Side Panels

Installing a Service-Side Door Add-on Package
Preparing to Install a Service Side Door:
These instructions described how to replace the short system enclosure doors with tall
system enclosure doors. You need a Phillips screwdriver and a T-125 Torx
screwdriver.
There are two kits:
The 7285 full-upgrade kit contains two doors and two side panels.●
The 7286 partial-upgrade kit contains two doors.●
Install the Service Side Door
1 Unpack the upgrade kit and verify that all items are present. Both upgrade
kits contain these items for installing doors:
A tall service side-door●
An adapter frame for the service-side door●
A tall appearance side-door ●
Group ID labels●
4 M5 PNHD Phillips screws●
4 M5 KEPS nuts●
4-mm hex-key wrench, for unlocking the door●
Read Me Instructions●
The 7285 full-upgrade kit also contains the components for installing side
panels.
2 If you are replacing the service side door, remove and discard the existing
door from the service side of the enclosure. (Return to Step 2 of Removing
and Installing Enclosure Doors.)
Install the adapter frame on the Enclosure: