Upgrading to S78000 and S88000 PMF CRUs

T2728AAL (OSM Service Provider)
T2730AAL (OSM Event Viewer)
T2751AAI (OSM Web-Based Suite)
These 3 new client-based numbers replace T2752 OSM Application Suite
T0632 AAI OSM Notification Director
T0633 AAI OSM Low-Level Link
T0634 AAI OSM Console Tools
TSM T7945ABN (TSM Server)
T8154ABG (TSM Client), first shipped on G06.22.
Note: G06.24 and later OSM and TSM have been enhanced to handle S88000
hardware error freeze (HEF) scan strings and reset the affected processors.
Cautions:
To upgrade the boot millicode to T7892ABD or later using the online update
function, you must have the G06.24 version of the TSM server (T7945ABN) or
later or all G06.24 OSM server based SPRs and their prerequisites configured
and running. See the Software Installation and Upgrade Guide (G06.24 or later)
and Hotstuff HS02865 for details. If you attempt to do an online update without
these, the processors will halt. When migrating from an earlier RVU to G06.24 or
later, you must use a hard reset as described in Step 4b or install the SPRs first.
After G06.24 or SPRs T2728AAL (OSM) or T9745ABN (TSM) are installed and
running, the boot code can be updated online. The online bootcode update
option is available on all S-series systems except S7000.
●
G06.06 provides a new disk bootstrap program. If you are migrating from an RVU
prior to G06.06, you must replace the disk bootstrap microcode with the new
version.
●
Upgrading to S78000 PMF CRUs
You must perform these steps in exactly the order listed here, even if you have
successfully completed previous upgrades by doing these steps in a different order.
1 Install the G06.24 SUT or appropriate RVUs. For further instructions, see
the Software Installation and Upgrade Guide (G06.24 or later).
If you are running G06.16 or an earlier RVU and migrating to a later RVU,
see the appropriate G06.xx verson of the Software Installation and
Upgrade Guide. The migration involves different considerations from other
migrations you might have performed in the past. For those migrating from
a pre-G06.06 RVU, the guide describes an additional step to perform after
the SUT is installed.