Powering On One Enclosure Does Not Power On Other Enclosures

Powering On One Enclosure Does Not Power
On Other Enclosures
Symptom
When you press the power-on button on one processor multifunction (PMF)
customer-replaceable unit (CRU) or one I/O multifunction (IOMF) CRU, the
other enclosures in the system do not power on.
Version or RVU
G06.00 and all subsequent G-series RVUs.
Problem
Power-on cables might not be connected correctly.
Fix
1 Verify that the power-on cables are firmly connected.
2 Verify that the power-on cables are connected between the
appropriate enclosures. For information on connecting power-on
cables:
For G06.21 and later, see the NonStop S-Series Hardware
Installation and FastPath Guide.
●
For G06.20 and earlier, see the NonStop S-Series
Hardware Installation Guide.
●
3 Press the power-on button again.