SEB Failure Indicators and Diagnostic Tools

ServerNet
Diagnostic Tool
To identify failed ServerNet
components, including SEBs.
Retired as of
G06.21.
Available in
TSM client 7.0
thru 2002C.
(Not available
in OSM or
TSM 2003A.)
TSM 2000A and later: Programs>
Compaq TSM> TSM Service
Provider Tools> ServerNet
Diagnostic Tool
TSM 7.0 through 10.0: Programs>
TSM Client> TSM Service Provider
Tools> ServerNet Diagnostic Tool
SP Tool
Application Path
Test command
To check ServerNet paths
from each group to all other
groups in the system.
OSM and
TSM client 5.0
and later.
OSM and TSM 2003A and later:
Start> Programs> HP SP Tool
TSM 2000A through 2002C:
Programs> Compaq TSM> TSM
Service Provider Tools> SP Tool:
TSM 7.0 through 10.0: Programs>
TSM Client> TSM Service Provider
Tools> SP Tool:
Version 5.0 to 7.1: Path Test
button
●
Version 8.0 and later:
ServerNet>Path Test
●
SP Tool
Application
ServerNet IA
command
To test ServerNet paths and
cable connections and obtain
suggested repair actions if a
problem is encountered.
TSM client 7.0
through
2002A.
Removed as of TSM 2002B. Use
OSM Service Connection or TSM
Service Application for incident
analysis and repair on ServerNet
Fabric.
TSM 2000A: Programs> Compaq
TSM> TSM Service Provider Tools>
SP Tool:
TSM 7.0 through 10.0: Programs>
TSM Client> TSM Service Provider
Tools> SP Tool:
Version 5.0 to 7.1: ServerNet
IA button
●
Version 8.0 and later:
ServerNet>ServerNet IA
●
Considerations for All Release Version Updates (RVUs)
In addition to identifying what is failing and what is still functioning, be sure that
you understand the customer account and environment, the risk to the customer
in replacing an SEB, and the best time to perform this replacement.
●