Troubleshooting the SLSA Subsystem

Example: Gathering PIF Statistics
The following is an example of the SCF STATS PIF command:
-> STATS PIF $ZZLAN.E0153.1.A
SLSA Stats PIF \FUDD.$ZZLAN.E0153.1.A
Sample Time..... 03 Nov 1998, 12:49:38.309
Reset Time...... 03 Nov 1998, 11:26:26.327
Octets Transmitted OK........... 31444
Octets Received OK.............. 25720
General Send Stats General Receive Stats
Unicast Frames Transmitted.. 340 Unicast Frames Received.... 342
Non-Unicast Frames Transmit. 342 Non-Unicast Frames Received 8
Frames Discarded............ 0 Frames Discarded........... 0
Errors...................... 0 Errors..................... 0
Current OutQueue Length .... 0 Unknown Protocols Frames... 0
The following additional statistics are displayed for the Ethernet 4 ServerNet adapter
(E4SA) and Fast Ethernet ServerNet adapter (FESA):
802.3 Send Stats 802.3 Receive Stats
Transmit Underruns.......... 0 Receive Overruns........... 0
Defer Packets............... 0 CRC Errors................. 0
Send Late Collison.......... 0 Receive Late Collision..... 0
Total Collision Frames...... 0 Alignment Errors........... 0
Excessive Collisions........ 0 Receive Long Frame......... 0
Total Collisions............ 0 Receive Short Frame........ 0
Heartbeat Check Errors...... 0
Loss of Carrier Sense....... 0
The following additional statistics are displayed for the Token-Ring ServerNet adapter
(TRSA):
802.5 (Token Ring) Stats
Line Errors ................ 0 Burst Errors .............. 0
AC Errors .................. 0 Abort Transmit Errors ..... 0
Internal Errors ............ 0 Lost Frame Errors ......... 0
Receive Congestions ........ 0 Frame Copied Errors ....... 0
Token Errors ............... 0 Soft Errors ............... 0
Hard Errors ................ 0 Signal Loss Errors ........ 0
Transmit Beacons ........... 0 Recoveries ................ 0
Lobe Wires ................. 0 Removes ................... 0
Singles .................... 0 Frequency Errors .......... 0