Troubleshooting the SLSA Subsystem

Lobe Wires is incremented when the adapter detects an open or short circuit between the
adapter and the multistation access unit (MAU). A non-zero count indicates an error
condition.
Removes is incremented when the adapter has received a remove-ring-station MAC frame.
An incrementing count in this field indicates a hardware fault in the adapter.
Singles is incremented each time the adapter recognizes that it is the only adapter on the
ring. This field is provided for informational purposes only.
Frequency Errors is incremented when the adapter detects that its incoming frames are
being transmitted at the wrong frequency. A non-zero count might indicate a hardware
problem in the adapter or in its upstream neighbor.