Troubleshooting the SLSA Subsystem

Example: Displaying Detailed Status for an
Adapter
This is an example of the SCF STATUS ADAPTER command with the DETAIL option for
an Ethernet 4 ServerNet adapter:
-> STATUS ADAPTER $ZZLAN.E0153, DETAIL
SLSA Detailed Status ADAPTER \FUDD.$ZZLAN.E0153
SP Cru Presence Status... Enabled ( 5 )
SP Cru Test Status....... Config OK ( 0x0006 )
State.................... STARTED
SP Cru Presence Status indicates service processor (SP) information about the presence
of the physical adapter in the location associated with the adapter.
SP Cru Test Status indicates SP information about the result of SP tests on the physical
adapter in the location associated with the adapter. The value are Test OK and Config OK.
State indicates the current state of the adapter.