Troubleshooting the SWAN Concentrator and WAN Subsystem

Example: Determining the WAN Subsystem IOPs
That Use a SWAN Concentrator
This is an example of the SCF STATUS ADAPTER command with the SUB ALL option:
Note: Only the detailed information for one communications line interface processor
(CLIP) 1 is included in the display.
-> STATUS ADAPTER $ZZWAN.#S01, SUB ALL
WAN Manager STATUS ADAPTER for ADAPTER \ICEBAT.$ZZWAN.#S01
State........... STARTED
Number of clips. 3
Clip 1 status : CONFIGURED
Clip 2 status : CONFIGURED
Clip 3 status : CONFIGURED
WAN Manager STATUS SERVER for CLIP \ICEBAT.$ZZWAN.#S01.1
State :......... STARTED
Path A..........: CONFIGURED
Path B..........: CONFIGURED
Number of lines. 2
Line............ 0 : $S01P1
Line............ 1 : FREE
WAN Manager STATUS PATH for PATH \ICEBAT.$ZZWAN.#S01.1.A
State :......... STARTED
MEDIA TYPE...... ETHERNET
MEDIA ADDRESS... %H08008E004814
WAN Manager STATUS PATH for PATH \ICEBAT.$ZZWAN.#S01.1.B
State :......... STARTED
MEDIA TYPE...... ETHERNET
MEDIA ADDRESS... %H08008E004815
WAN Manager STATUS TASK for TASK \ICEBAT.$ZZWAN.#S01.1.DIAG
State :........... STOPPED
WAN Manager STATUS TASK for TASK \ICEBAT.$ZZWAN.#S01.1.DLC0
State :........... STARTING
WAN Manager STATUS TASK for TASK \ICEBAT.$ZZWAN.#S01.1.DLC1
State :........... STARTING
The name of the WAN subsystem input/output process (IOP) configured to use a line on a
SWAN concentrator is shown in the Line field. In this example, a line named $S01P1 is