Troubleshooting the SWAN Concentrator and WAN Subsystem

Example: Determining the LIFs Used by a SWAN
Concentrator
These are examples of the SCF INFO SUBNET command:
->INFO SUBNET $ZB019.*
TCPIP Info SUBNET \JULIE.$ZB019.*
Name Devicename *IPADDRESS TYPE *SUBNETMASK SuName QIO *R
#LOOP0 \NOSYS.$NOIOP 127.0.0.1 LOOP-BACK %HFF000000 OFF N
#SN1 \JULIE.L019 172.16.45.16 ETHERNET %HFFFFFF00 ON N
->INFO SUBNET $ZB01D.*
TCPIP Info SUBNET \JULIE.$ZB01D.*
Name Devicename *IPADDRESS TYPE *SUBNETMASK SuName QIO *R
#LOOP0 \NOSYS.$NOIOP 127.0.0.1 LOOP-BACK %HFF000000 OFF N
#SN1 \JULIE.L01D 172.16.35.16 ETHERNET %HFFFFFF00 ON N
The following information should help you interpret the command display:
The logical interface (LIF) name is displayed in the Devicename column.●
The Internet Protocol (IP) address associated with each SUBNET object is displayed
in the IPADDRESS column. The subnet mask used is displayed in the
SUBNETMASK column. (To address subnets within a LAN, the local address portion
of an IP address is subdivided into a subnet number that identifies a particular subnet
and a host number that identifies a host within the subnet.)
●
The type of adapter is shown in the TYPE column.●