Troubleshooting the SWAN Concentrator and WAN Subsystem

5 Verify that the SNMP agent processes that support the SNMP trap multiplexer processes are
in the STARTED state.
Use the SCF STATUS PROCESS command:
STATUS PROCESS $<snmp-agent-process>
The example shows the output of the SCF STATUS PROCESS command.
6 Verify that the WAN subsystem processes (ConMgr, TFTP server, SNMP trap multiplexer,
and WANBoot processes) are in the STARTED state.
Use the SCF STATUS PROCESS command:
STATUS PROCESS $ZZWAN.#*
The example shows the output of the SCF STATUS PROCESS command.
7 Verify that the SWAN concentrator ADAPTER object and its subordinate objects are in the
STARTED state.
Use the SCF STATUS ADAPTER command with the SUB ALL option:
STATUS ADAPTER $ZZWAN.#<adapter>, SUB ALL
The example shows the output of the SCF STATUS ADAPTER command.
8 Verify that the WAN subsystem devices (DEVICE object) are in the STARTED state.
Use the SCF STATUS DEVICE command:
STATUS DEVICE $ZZWAN.#<device-name>
The example shows the output of the SCF STATUS DEVICE command.
For information about starting a WAN subsystem process or object, refer to Starting the WAN
Subsystem Processes and Objects.