Troubleshooting the SWAN Concentrator and WAN Subsystem

9 One SNMP trap multiplexer process is associated with one or more TCP/IP
processes that support the SWAN concentrator. You can configure one SNMP
trap mulitplexer process for each TCP/IP process, or you can configure one
SNMP trap multiplexer for several TCP/IP processes. One SNMP trap
multiplexer process can accommodate up to 35 TCP/IP processes (G05.00
and later RVUs) or 6 TCP/IP processes (G03.00 and earlier RVUs).
Use the SCF INFO PROCESS command to show the TCP/IP processes
associated with an SNMP trap multiplexer process:
INFO PROCESS $ZZWAN.#*
The example shows the output of this command and explains how to interpret
it.
10 One SNMP agent process is required for each SNMP trap multiplexer process.
Use the SCF INFO PROCESS command to display the SNMP agent process
associated with an SNMP trap multiplexer process:
INFO PROCESS $ZZWAN.#*
The example shows the output of this command and explains how to interpret
it.
11 One TFTP server process is required for each TCP/IP process that supports
the SWAN concentrator. A TFTP server process should be configured to run in
the same processor as its associated primary TCP/IP process.
Use the SCF INFO PROCESS command to display the TFTP server
processes configured on the system:
INFO PROCESS $ZZWAN.#*
The example shows the output of this command and explains how to interpret
it.