HP PCIe 2 port 10Gb Ethernet-SR, LR, and CR Adapter Installation Guide Abstract This document contains specific information that is intended for users of this HP product.
© Copyright 2012 Hewlett-Packard Development Company, L.P. © Copyright 2010 Emulex Corporation. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
1 HBA specifications This chapter contains the HBA specifications, including: • “Product Numbers” (page 3) • “Environmental Specifications” (page 3) • “Physical Specifications” (page 4) • “System Interface and Support” (page 4) • “Operating System Support” (page 4) • “Ethernet Technology” (page 4) Figure 1 HP PCIe 2–Port 10GbE Adapter Product Numbers The following are three (3) different options of the PCIe 2 Port 10GbE adapter: • AM225A: HP PCIe 2–P 10GbE-SR (fabric) adapter • AM232A: HP PC
Table 2 Environmental Specifications (continued) Environment Minimum Maximum Non-operating/Storage humidity 90% RH at 65° C (149° F) for 24 hours (non-condensing) Vibration Random operating: ~0.21 Grms (5–500 Hz) Swept sine: 0.5 Grms (5–500 Hz) 5 min. dwell at 4 resonance Random survival: ~2.09 Grms (5–500Hz) Operating altitude 0 to 3,000 m (0 to ~10,000 ft) Non-operating altitude 0 to 4,600 m (0 to ~15,000 ft) Physical Specifications Table 3 lists the physical specifications.
• Supports TCP Offload Engine and RDMA features • Supports SFP+ Optical modules • Supports SFP+ direct attached copper cable (base CR) • Supports 10Gb speed only Ethernet Technology 5
2 Installing HBAs This chapter describes the following topics for installing HBAs: • “Installation Prerequisites” (page 6) • “Installing the HBA” (page 8) See your server's documentation for additional information about installing HBAs. WARNING! Disconnect the host from the power source before installing HBAs. To reduce the risk of personal injury from hot surfaces, allow the internal server or workstation components to cool before touching.
Figure 2 LED Location on the 2–Port 10GbE Adapter Low-Profile and Full Height Bulkheads LED Function There are two (2) LED's per 10Gigabit Ethernet port on the AM225A, AM232A, and AM233A adapters. Table 4 explains their functionality: Table 4 LED Functions Function LED Color Description Link (LINK) Green Solid green indicates 10Gb Ethernet Link is established Activity (ACT) Amber Blinking Amber indicates 10Gb Ethernet traffic On Board Jumpers and Dip Switches There are no jumpers on board.
The AM233A uses direct-attach copper cables that plug directly into the SFP+ module cages and do not require additional SFP+ modules. • Each AM225A and AM232A ships with two SFP+ modules. • Each SFP+ module has a tab that can be flipped down into the Open position (parallel to the length of the module) or flipped up into the Closed position (perpendicular to the length of the module).
4. To see all LAN cards with drivers, run: ioscan -fnC lan If you do not see your card, use ioscan to determine if the card is there but needs a driver (UNCLAIMED). ioscan -fn 5. Install the driver or update the driver to the latest version. Get the latest driver from the HP Software Depot website. To download the 10GigEthr-02 bundle from the HP Software Depot website, follow these steps: a. Go to the HP Software Depot website at: http://www.software.hp.com/ b. c. Search for 10GigEthr-02.
3 Installing the Windows Smart Component driver kit This chapter describes how to locate and download the Windows Smart Component driver kit from the web. This chapter also describes how to install or update your Windows driver.
4 Regulatory Compliance and Safety Laser device All HP systems equipped with a laser device comply with safety standards, including International Electrotechnical Commission (IEC) 825. With specific regard to the laser, the equipment complies with laser product performance standards set by government agencies as a Class 1 laser product. The product does not emit hazardous light.
European Union notice Products bearing the CE marking comply with the EMC Directive (2004/108/EMC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community and if this product has telecommunication functionality, the R&TTE Directive (1999/5/EC).
Korean notices Figure 6 Korean notices Electrostatic Discharge To prevent damage to the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device.
Declaration of Conformity 14 Regulatory Compliance and Safety
5 Support and other resources Contacting HP Before you contact HP Be sure to have the following information available before you call contact HP: • Technical support registration number (if applicable) • Product serial number • Product model name and number • Product identification number • Applicable error message • Add-on boards or hardware • Third-party hardware or software • Operating system type and revision level HP contact information For the name of the nearest HP authorized reseller
%, $, or # A percent sign represents the C shell system prompt. A dollar sign represents the system prompt for the Bourne, Korn, and POSIX shells. A number sign represents the superuser prompt. audit(5) A manpage. The manpage name is audit, and it is located in Section 5. Command A command name or qualified command phrase. Computer output Text displayed by the computer. Ctrl+x A key sequence.
may not be additional charges, depending on the type of warranty service designated for your product. Based on availability and where geography permits, Customer Self Repair parts will be shipped for next business day delivery. Same day or four-hour delivery may be offered at an additional charge where geography permits. If assistance is required, you can call the HP Technical Support Center and a technician will help you over the telephone.
