HP Fabric Clustering System PCI-X 2-port 4X Fabric (DB) Adapter Installation Guide HP-UX Integrity Server Networking HP-UX11i v2 Manufacturing Part Number: AB345-90001 April 2006 Printed in the US © Copyright 2004-2006 Hewlett-Packard Development Company L.P.
Legal Notices The information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material.
HP PCI-X 2-port 4X Fabric (DB) Adapter Installation HP Fabric Clustering System Installation Prerequisites 1 HP PCI-X 2-port 4X Fabric (DB) Adapter Installation This document gives installation information for the HP Fabric Clustering System Host Channel Adapter (HCA) for InfiniBand, AB345C PCI-X 133Mhz adapter with 2 (two) 4X copper interfaces. The AB345C product is for use in database clusters and includes features specifically required to support and integrate with the Oracle 10gRAC database.
HP PCI-X 2-port 4X Fabric (DB) Adapter Installation HP Fabric Clustering System Installation Prerequisites • Check the HP PCI-X 2-port 4X Fabric Adapter Release Notes for known problems, required patches, or other information needed for installation, available at http://www.docs.hp.com in the Networking & Communications section. The latest switch firmware and is available online at: http://support.hp.com 1. Select Software and Driver downloads. 2. Enter your product name. 3. Click the double arrow.
HP PCI-X 2-port 4X Fabric (DB) Adapter Installation Install HP Fabric Clustering System Adapters Install HP Fabric Clustering System Adapters Adapters contain electronic components that can easily be damaged by small amounts of electricity. To avoid damage, follow these guidelines: CAUTION • Store adapters in their anti-static plastic bags until installation. • Work in a static-free area, if possible. • Handle adapters by the edges only. Do not touch electronic components or electrical traces.
HP PCI-X 2-port 4X Fabric (DB) Adapter Installation Install HP Fabric Clustering System Software Install HP Fabric Clustering System Software This section describes the steps necessary to install HP Fabric Clustering System software. The same software version must be installed on each instance of the HP-UX operating system in the fabric. The AB345C HCA can only be installed in supported Integrity servers. Step 1. Log on to the system as root. Step 2. Insert the software media into the appropriate drive.
HP PCI-X 2-port 4X Fabric (DB) Adapter Installation Internet Protocol over InfiniBand (IPoIB) Step 9. Select the OK button in the Install Analysis window when the Status field displays a Ready message. Step 10. Select the YES button in the Confirmation window to start software installation. swinstall loads the fileset, runs the control script for the filesets, and builds the kernel. When the processing is finished, the Status field displays a Ready message. Select Done and then the Note window opens.
HP PCI-X 2-port 4X Fabric (DB) Adapter Installation On-Line Addition and Replacement Operations (OL*) On-Line Addition and Replacement Operations (OL*) On-Line Addition and Replacement (OL*) of HP Fabric adapters is supported on HP Fabric Clustering System version B.11.23.02 or newer with a couple of limitations related to replacing an HCA, see below. Replacing an HP Fabric Clustering System HCA CAUTION Do Not use an Attention Button to REPLACE an HP Fabric HCA.
HP PCI-X 2-port 4X Fabric (DB) Adapter Installation Running Applications - Configuring Virtual HCAs 9002 9003 0xffff 0xffff 1 2 ib1 ib1 0/5/1/0/0/0 0/5/1/0/0/0 Step 2. Assign one or more primary IP addresses to the IPoIB PPAs. $ ifconfig lan9000 192.168.1.1 $ ifconfig lan9002 192.168.2.1 $netstat Name lan9002 lan9000 lan0 lo0 snap9000 snap9001 $ -in Mtu 2044 2044 1500 4136 1492 1492 Network 192.168.2.0 192.168.1.0 15.61.184.0 127.0.0.0 101.102.101.0 101.102.201.0 Address 192.168.2.1 192.168.1.1 15.
HP PCI-X 2-port 4X Fabric (DB) Adapter Installation Declaration of Conformity Declaration of Conformity Chapter 1 10
